Econex Manometers Hoeveelheidsmeters

Dial pressure gauge

The dial pressure gauges are specially conceived for the measurement
of low pressures ranging in mbar, according to
EN 837-3 or high pressure in bar.

They are suitable to be used on natural gas combustion systems
and to measure pressure of non-corrosive fluids at the
gaseous state.

They are available with 1/4” – 3/8” – 1/2” radial male connection
and with 63 – 80 and 100 mm dial diameter size.

The standard version is equipped with dual scale in mbar
and in H2O mm.


Open Documentatie

Two-way manual

pressure cock
with bleed-off

The manual pressure gauge valve enables, by pushing the button, to check the existing pressure when testing the system.

By releasing the button, the valve automatically closes; the manual pressure gauge returns to 0 setting and to rest position, remaining protected from water hammers, accidental overpressure, etc.

These pressure cocks have the certificate according to norms EN331.


Open Documentatie

Turbine gas flow quantometer

klik voor grote afbeelding

series CPT

CPT quantometers, designed in order to provide a reliable
and inexpensive measuring device [non fiscal],
with features alike those of fiscal turbine meter, are
maintenance free and can be logged onto external

Quantometers fulfil various requirements of industrial
metering to control the flow of gas precisely
and therefore optimise the use of energy.
Turbine gas meters work on the principle of the ratio
among gas moving through the meter and wheel
speed. A mechanical/magnetic coupling activates the
measuring unit on the top of the quantometer reporting
the gas volume at operating.
CPT quantometers are certified and PED
2014/68/EU approved.

Open Documentatie


Geef een reactie

Het e-mailadres wordt niet gepubliceerd. Vereiste velden zijn gemarkeerd met *